ECUHARD
Recent Projects
Sign In
Project #24972

EDC17C69 10SW074925 52161276 52198351 EDC17C69_FCA 10SW062898 0281037068

FIAT - ALFA - JEEP Car Diesel ADBLUE OFF + DPF OFF + EGR OFF + LAMBDA OFF + NOX OFF + DTC OFF ✓ Completed Oct 22, 2026

Vehicle & ECU

ECUEDC17C69
Brand groupFIAT - ALFA - JEEP
Vehicle typeCar
FuelDiesel
File size4.00 MB 4,194,304 bytes
Completed
Automated processing≈ 40 min
Status✓ Completed & delivered
Original filefca_bosch_edc17c69_2021_bench_intflash_41c80a0cd6a3a3841b0c002011000000_20261022123857_REVORI.bin
Stock fileStock file in ORI archive (#31148) →

ECM Titanium

Driver · Vehicle · ECUA22_866D · ALFA ROMEO STELVIO · EDC17C69

Software identification 6

Software number10SW074925
Identifier 252161276
Identifier 352198351
Identifier 4EDC17C69_FCA
Identifier 510SW062898
Identifier 60281037068

Operations performed 6

  1. ADBLUE OFF automated · solution rev 31 · ~10 min

    Disables the AdBlue (SCR) system in software; no AdBlue refills are needed afterwards.

  2. DPF OFF automated · solution rev 18 · ~5 min

    Deletes the diesel particulate filter (DPF) system in software; if the DPF and AdBlue (SCR) share one housing, AdBlue must be deleted as well.

  3. EGR OFF automated · solution rev 38 · ~5 min

    Disables the exhaust gas recirculation (EGR) system.

  4. LAMBDA OFF automated · solution rev 20 · ~5 min

    Disables the oxygen (lambda) sensors.

  5. NOX OFF automated · solution rev 10 · ~5 min

    Disables the NOx sensor.

  6. DTC OFF automated · solution rev 1 · ~10 min

    Permanently disables the fault codes (DTC) you select; you need to provide the P codes to turn off.

    • P0030HO2S Heater Control Circuit Bank 1 Sensor 1
    • P0031HO2S Heater Control Circuit Low Bank 1 Sensor 1
    • P0032HO2S Heater Control Circuit High Bank 1 Sensor 1
    • P0053HO2S Heater Resistance Bank 1 Sensor 1
    • P0130O2=Sensor Circuit Bank 1 Sensor 1
    • P0131O2=Sensor Circuit Low Voltage Bank 1 Sensor 1
    • P0401Exhaust Gas Recirculation Flow Insufficient Detected
    • P0402Exhaust Gas Recirculation Flow Excessive Detected
    • P0403Exhaust Gas Recirculation Control Circuit
    • P0404Exhaust Gas Recirculation Control Circuit Range/Performance
    • P0405Exhaust Gas Recirculation Sensor "A" Circuit Low
    • P0406Exhaust Gas Recirculation Sensor "A" Circuit High
    • P0407Exhaust Gas Recirculation Sensor "B" Circuit Low
    • P0408Exhaust Gas Recirculation Sensor "B" Circuit High
    • P0409Exhaust Gas Recirculation Sensor "A" Circuit
    • P040CEGR Temperature Sensor "A" Circuit Low
    • P040DEGR Temperature Sensor "A" Circuit High
    • P041CEGR Temperature Sensor "B" Circuit Low
    • P041DEGR Temperature Sensor "B" Circuit High
    • P0420Catalyst System Efficiency Below Threshold Bank 1
    • P0426Catalyst Temperature Sensor Range/Performance Bank 1
    • P042EEGR "A" Control Stuck Open
    • P045AEGR "B" Control Circuit
    • P045BEGR "B" Control Circuit Range/Performance
    • P045CEGR "B" Control Circuit Low
    • P045DEGR "B" Control Circuit High
    • P045EEGR "B" Control Stuck Open
    • P046CEGR Sensor "A" Circuit Range/Performance
    • P046EEGR Sensor "B" Circuit Range/Performance
    • P0472Exhaust Pressure Sensor Low
    • P0473Exhaust Pressure Sensor High
    • P0476Exhaust Pressure Control Valve Range/Performance
    • P047AExhaust Pressure Sensor "B" Circuit
    • P047BExhaust Pressure Sensor "B" Circuit Range/Performance
    • P047CExhaust Pressure Sensor "B" Circuit Low
    • P047DExhaust Pressure Sensor "B" Circuit High
    • P0486Exhaust Gas Recirculation Sensor "B" Circuit
    • P0489Exhaust Gas Recirculation Control Circuit Low
    • P0490Exhaust Gas Recirculation Control Circuit High
    • P0544Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 1
    • P0545Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 1
    • P0546Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 1
    • P0548Exhaust Gas Temperature Sensor Circuit Low Bank 2 Sensor 1
    • P0549Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 1
    • P06EANOx Sensor Processor Performance Bank 1 Sensor 1
    • P06EBNOx Sensor Processor Performance Bank 1 Sensor 2
    • P1489EGR Flow Insufficient Detected
    • P2000NOx Trap Efficiency Below Threshold Bank 1
    • P2002Particulate Trap Efficiency Below Threshold Bank 1
    • P2031Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 2
    • P2032Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 2
    • P2033Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2
    • P2044Reductant Temperature Sensor Circuit Low Input
    • P2045Reductant Temperature Sensor Circuit High Input
    • P204FReductant System Performance Bank 1
    • P2062Reductant Supply Control Circuit/Open
    • P2063Reductant Supply Control Circuit Low
    • P2064Reductant Supply Control Circuit High
    • P2080Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 1
    • P2082Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 1
    • P20EESCR NOx Catalyst Efficiency Below Threshold Bank 1
    • P2200NOx Sensor Circuit Bank 1
    • P2201NOx Sensor Circuit Range/Performance Bank 1
    • P2202NOx Sensor Circuit Low Input Bank 1
    • P2203NOx Sensor Circuit High Input Bank 1
    • P220FNOx sensor 2 heater sensor fault commander position can't be reached
    • P2210NOx Sensor Heater Sense Circuit Low Input Bank 1
    • P2211NOx Sensor Heater Sense Circuit High Input Bank 1
    • P2213NOx Sensor Circuit Bank 2
    • P2214NOx Sensor Circuit Range/Performance Bank 2
    • P2215NOx Sensor Circuit Low Input Bank 2
    • P2216NOx Sensor Circuit High Input Bank 2
    • P2224NOx Sensor Heater Sense Circuit High Bank 2
    • P225ENOx Sensor Performance - Signal Biased/Stuck High
    • P226DParticulate Filter Deteriorated/Missing Substrate Bank 1
    • P229FNOx Sensor Circuit Range/Performance Bank 1 Sensor 2
    • P22F9NOx Sensor Performance - Slow Response Low to High Bank 1 Sensor 1
    • P22FCNOx Sensor Performance - Slow Response Low to High Bank 1 Sensor 2
    • P2413Exhaust Gas Recirculation System Performance
    • P241DSCR Inducement - Forced Engine Shutdown
    • P242BExhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 3
    • P242CExhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 3
    • P242DExhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 3

Other solutions for this ECU 13

Every operation below can be ordered for the same EDC17C69 file (diesel). Prices are per file in EUR; automatic solutions are delivered within minutes, engineer-assisted ones are prepared by our tuning team.

STAGE1 A performance tune that needs no mechanical changes and stays within the factory safety limits. automatic, 25 ready solutions for this file size · ~15 min 30 EUR
STAGE2 A performance tune for vehicles with hardware upgrades such as a downpipe, intercooler or intake; DPF/EGR delete is a separate operation. automatic, 2 ready solutions for this file size · ~60 min 60 EUR
STAGE3 A performance tune built from data logs after vehicle-specific hardware upgrades. engineer-assisted, on request · ~180 min 300 EUR
ADBLUE OFF Disables the AdBlue (SCR) system in software; no AdBlue refills are needed afterwards. done in this project ✓
DPF OFF Deletes the diesel particulate filter (DPF) system in software; if the DPF and AdBlue (SCR) share one housing, AdBlue must be deleted as well. done in this project ✓
EGR OFF Disables the exhaust gas recirculation (EGR) system. done in this project ✓
LAMBDA OFF Disables the oxygen (lambda) sensors. done in this project ✓
DECAT Disables catalytic converter efficiency monitoring and the P0420/P0430 fault codes. automatic, 9 ready solutions for this file size · ~5 min 15 EUR
NOX OFF Disables the NOx sensor. done in this project ✓
VMAX Removes the speed limiter (Vmax) or sets it to the desired value. automatic, 7 ready solutions for this file size · ~5 min 15 EUR
TVA OFF Disables the diesel throttle valve. automatic, 5 ready solutions for this file size · ~5 min 15 EUR
FLAPS OFF Disables the swirl flaps in the intake manifold. automatic, 7 ready solutions for this file size · ~5 min 15 EUR
STARTSTOP OFF Permanently disables the Start/Stop system. automatic, 1 ready solution for this file size · ~20 min 60 EUR
IMMO OFF Disables the immobilizer system so the vehicle can start and run. automatic, 1 ready solution for this file size · ~180 min 75 EUR
HOT START Fixes the rough/delayed starting issue (hot start) that occurs when the engine is hot. engineer-assisted, on request · ~10 min 30 EUR
HARDCUT Sets the engine hardcut (rev cut) point. automatic, 5 ready solutions for this file size · ~20 min 15 EUR
LAUNCH CONTROL Adds a launch control feature that holds the engine at a set rpm for take-off. engineer-assisted, on request · ~10 min 30 EUR
DTC OFF Permanently disables the fault codes (DTC) you select; you need to provide the P codes to turn off. done in this project ✓
REV ORI Restores your modified software file to its original factory state. automatic, stock file in archive · ~120 min 15 EUR
Have a EDC17C69 file? Sign in to the ECUHARD platform, upload it and pick the operations — automatic solutions are ready in minutes, 24/7, invoice issued automatically.
Sign in & upload your file →

About this project

Bosch EDC17 is a widely used common-rail diesel ECU generation (Euro 4–6) with DFES fault-code tables. This unit is fitted to FIAT - ALFA - JEEP Car vehicles. Project #24972 was completed automatically by the ECUHARD file service for a FIAT - ALFA - JEEP Car vehicle running software 10SW074925 52161276 52198351 EDC17C69_FCA 10SW062898 0281037068. Disabled fault codes: P0030, P0031, P0032, P0053, P0130, P0131, P0401, P0402, P0403, P0404, P0405, P0406, P0407, P0408, P0409, P040C, P040D, P041C, P041D, P0420, P0426, P042E, P045A, P045B, P045C, P045D, P045E, P046C, P046E, P0472, P0473, P0476, P047A, P047B, P047C, P047D, P0486, P0489, P0490, P0544, P0545, P0546, P0548, P0549, P06EA, P06EB, P1489, P2000, P2002, P2031, P2032, P2033, P2044, P2045, P204F, P2062, P2063, P2064, P2080, P2082, P20EE, P2200, P2201, P2202, P2203, P220F, P2210, P2211, P2213, P2214, P2215, P2216, P2224, P225E, P226D, P229F, P22F9, P22FC, P2413, P241D, P242B, P242C, P242D.

Frequently asked questions

What was done to this EDC17C69 file?

Operations performed: ADBLUE OFF, DPF OFF, EGR OFF, LAMBDA OFF, NOX OFF, DTC OFF. The modified file was checksum-corrected and delivered ready to flash.

Which fault codes (DTC) were disabled?

P0030 (HO2S Heater Control Circuit Bank 1 Sensor 1); P0031 (HO2S Heater Control Circuit Low Bank 1 Sensor 1); P0032 (HO2S Heater Control Circuit High Bank 1 Sensor 1); P0053 (HO2S Heater Resistance Bank 1 Sensor 1); P0130 (O2=Sensor Circuit Bank 1 Sensor 1); P0131 (O2=Sensor Circuit Low Voltage Bank 1 Sensor 1); P0401 (Exhaust Gas Recirculation Flow Insufficient Detected); P0402 (Exhaust Gas Recirculation Flow Excessive Detected); P0403 (Exhaust Gas Recirculation Control Circuit); P0404 (Exhaust Gas Recirculation Control Circuit Range/Performance); P0405 (Exhaust Gas Recirculation Sensor "A" Circuit Low); P0406 (Exhaust Gas Recirculation Sensor "A" Circuit High); P0407 (Exhaust Gas Recirculation Sensor "B" Circuit Low); P0408 (Exhaust Gas Recirculation Sensor "B" Circuit High); P0409 (Exhaust Gas Recirculation Sensor "A" Circuit); P040C (EGR Temperature Sensor "A" Circuit Low); P040D (EGR Temperature Sensor "A" Circuit High); P041C (EGR Temperature Sensor "B" Circuit Low); P041D (EGR Temperature Sensor "B" Circuit High); P0420 (Catalyst System Efficiency Below Threshold Bank 1); P0426 (Catalyst Temperature Sensor Range/Performance Bank 1); P042E (EGR "A" Control Stuck Open); P045A (EGR "B" Control Circuit); P045B (EGR "B" Control Circuit Range/Performance); P045C (EGR "B" Control Circuit Low); P045D (EGR "B" Control Circuit High); P045E (EGR "B" Control Stuck Open); P046C (EGR Sensor "A" Circuit Range/Performance); P046E (EGR Sensor "B" Circuit Range/Performance); P0472 (Exhaust Pressure Sensor Low); P0473 (Exhaust Pressure Sensor High); P0476 (Exhaust Pressure Control Valve Range/Performance); P047A (Exhaust Pressure Sensor "B" Circuit); P047B (Exhaust Pressure Sensor "B" Circuit Range/Performance); P047C (Exhaust Pressure Sensor "B" Circuit Low); P047D (Exhaust Pressure Sensor "B" Circuit High); P0486 (Exhaust Gas Recirculation Sensor "B" Circuit); P0489 (Exhaust Gas Recirculation Control Circuit Low); P0490 (Exhaust Gas Recirculation Control Circuit High); P0544 (Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 1); P0545 (Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 1); P0546 (Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 1); P0548 (Exhaust Gas Temperature Sensor Circuit Low Bank 2 Sensor 1); P0549 (Exhaust Gas Temperature Sensor Circuit High Bank 2 Sensor 1); P06EA (NOx Sensor Processor Performance Bank 1 Sensor 1); P06EB (NOx Sensor Processor Performance Bank 1 Sensor 2); P1489 (EGR Flow Insufficient Detected); P2000 (NOx Trap Efficiency Below Threshold Bank 1); P2002 (Particulate Trap Efficiency Below Threshold Bank 1); P2031 (Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 2); P2032 (Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 2); P2033 (Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 2); P2044 (Reductant Temperature Sensor Circuit Low Input); P2045 (Reductant Temperature Sensor Circuit High Input); P204F (Reductant System Performance Bank 1); P2062 (Reductant Supply Control Circuit/Open); P2063 (Reductant Supply Control Circuit Low); P2064 (Reductant Supply Control Circuit High); P2080 (Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 1); P2082 (Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 1); P20EE (SCR NOx Catalyst Efficiency Below Threshold Bank 1); P2200 (NOx Sensor Circuit Bank 1); P2201 (NOx Sensor Circuit Range/Performance Bank 1); P2202 (NOx Sensor Circuit Low Input Bank 1); P2203 (NOx Sensor Circuit High Input Bank 1); P220F (NOx sensor 2 heater sensor fault commander position can't be reached); P2210 (NOx Sensor Heater Sense Circuit Low Input Bank 1); P2211 (NOx Sensor Heater Sense Circuit High Input Bank 1); P2213 (NOx Sensor Circuit Bank 2); P2214 (NOx Sensor Circuit Range/Performance Bank 2); P2215 (NOx Sensor Circuit Low Input Bank 2); P2216 (NOx Sensor Circuit High Input Bank 2); P2224 (NOx Sensor Heater Sense Circuit High Bank 2); P225E (NOx Sensor Performance - Signal Biased/Stuck High); P226D (Particulate Filter Deteriorated/Missing Substrate Bank 1); P229F (NOx Sensor Circuit Range/Performance Bank 1 Sensor 2); P22F9 (NOx Sensor Performance - Slow Response Low to High Bank 1 Sensor 1); P22FC (NOx Sensor Performance - Slow Response Low to High Bank 1 Sensor 2); P2413 (Exhaust Gas Recirculation System Performance); P241D (SCR Inducement - Forced Engine Shutdown); P242B (Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 3); P242C (Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 3); P242D (Exhaust Gas Temperature Sensor Circuit High Bank 1 Sensor 3). Each code is switched off in the ECU fault table, so it is no longer stored or shown by diagnostic tools.

What is the software version for this EDC17C69 file?

This project is for EDC17C69 with software numbers: 10SW074925, 52161276, 52198351, EDC17C69_FCA, 10SW062898, 0281037068. The same operations apply to other vehicles running the same software.

Can I get the same tuning for my FIAT - ALFA - JEEP?

Yes. Sign in, upload your original ECU file (EDC17C69 or any supported ECU), choose the operations you need and our automated system prepares the file, usually within minutes, 24/7.

I read my ECU with a different tool — will the tuning fit my file?

Yes. Every operation is applied to the file you upload — your own read from your own car — so the tool and the read mode do not matter: the modifications are located by content, not by a fixed file layout. If your file was modified before, our REV ORI (revert to original) module repairs every changed area back to the stock values first — no matter which tool or method read it (KTAG, KESS, Flex, Autotuner, CMD, OBD, bench or boot) (15 EUR). A compatibility problem is therefore impossible.

I have an OBD read — can you tune it, or do I need a bench/boot read?

An OBD read is fine as long as it contains the software area (maps). Upload it; the platform detects the ECU and software number and shows which operations are available for your file. If the read is partial and an operation is not possible on it, you will see that before paying.

I read boot mode with KTAG / bench with Flex / bench or OBD with Autotuner — which read do I upload?

Any of them. Upload the file exactly as your tool saved it (EDC17C69 reads are supported in OBD, bench and boot form). The system works on your own read, so nothing has to be converted or matched to a different device.

Do you need the full backup (EEPROM, other sectors)?

No. Only the software-related part of the ECU is used: the maps area — the internal flash and/or the external flash, depending on where the software lives in that ECU. EEPROM and other memory sectors are not needed and are never modified. Keep your full backup for yourself as a safety copy.

How can I be sure the result will be compatible with my ECU?

Because the file returned to you is your own read with only the selected areas changed and the checksum corrected, it flashes back with the same tool and method you used to read it. The software number stays the same; nothing else in the file is touched.

What other operations are available for EDC17C69?

STAGE1 (30 EUR, automatic, 25 ready solutions for this file size); STAGE2 (60 EUR, automatic, 2 ready solutions for this file size); STAGE3 (300 EUR, engineer-assisted, on request); DECAT (15 EUR, automatic, 9 ready solutions for this file size); VMAX (15 EUR, automatic, 7 ready solutions for this file size); TVA OFF (15 EUR, automatic, 5 ready solutions for this file size); FLAPS OFF (15 EUR, automatic, 7 ready solutions for this file size); STARTSTOP OFF (60 EUR, automatic, 1 ready solution for this file size); IMMO OFF (75 EUR, automatic, 1 ready solution for this file size); HOT START (30 EUR, engineer-assisted, on request); HARDCUT (15 EUR, automatic, 5 ready solutions for this file size); LAUNCH CONTROL (30 EUR, engineer-assisted, on request); REV ORI (15 EUR, automatic, stock file in archive). Prices are per file.

I have a EDC17C69 file — how can I get it done?

Sign in to the ECUHARD platform (solutions.ecuhard.com), upload your ECU file, select the operations you need and confirm. Automatic solutions are delivered within minutes, 24/7; engineer-assisted operations are prepared by our tuning team. Each file is checksum-corrected and an invoice is issued automatically.

Is there an ECM Titanium driver for this EDC17C69 file?

Yes. The file is linked to ECM Titanium driver A22_866D (ALFA ROMEO STELVIO). Matched: the software range is identical to the driver reference. The driver tells the software where the maps of this ECU software are, so tools that use ECM drivers, including the ECUHARD Tuning Editor, can open the maps automatically.

Do I need to send my original file?

Yes — upload the stock read of your ECU. If you do not have it, our original file archive may have a matching file by software number.