MG1CS221 90V9025ABB DME-980 S68B44T0-F95 90V9025ABBSQZV5 MG1CS221_BMW

It is the untouched factory software read from the ECU before any modification. Tuners keep it as a backup and use it as the base for Stage 1/2, DPF/EGR/AdBlue off or DTC removal.

Match by the software number (90V9025ABB, DME-980, S68B44T0-F95, 90V9025ABBSQZV5, MG1CS221_BMW) printed on the ECU label or read by your flashing tool. The software number must be identical.

The file costs 99 EUR (one-time). Sign in, open this page and click Buy & Download — the file is sent to your e-mail instantly and stays in your account. An invoice is issued automatically.

Different tools and modes (OBD, bench, boot) read different memory ranges, so an archive file may not be byte-compatible with your read even when the software number matches. Our platform has a REV ORI (revert to original) module: upload the file you read from your own car — no matter which tool or method was used (KTAG, KESS, Flex, Autotuner, CMD, OBD, bench or boot) — and it repairs every modified area back to the stock values and returns your own file. Because it works on your own read, a compatibility problem is impossible. REV ORI costs 99 EUR, the same as this original file.

Compare the software number (90V9025ABB, DME-980, S68B44T0-F95, 90V9025ABBSQZV5, MG1CS221_BMW), the read type (FULL) and the file size (10.00 MB) on this page with your own read. If they differ, do not guess: Our platform has a REV ORI (revert to original) module: upload the file you read from your own car — no matter which tool or method was used (KTAG, KESS, Flex, Autotuner, CMD, OBD, bench or boot) — and it repairs every modified area back to the stock values and returns your own file. Because it works on your own read, a compatibility problem is impossible. REV ORI costs 99 EUR, the same as this original file.

You do not need to match the tool. Our platform has a REV ORI (revert to original) module: upload the file you read from your own car — no matter which tool or method was used (KTAG, KESS, Flex, Autotuner, CMD, OBD, bench or boot) — and it repairs every modified area back to the stock values and returns your own file. Because it works on your own read, a compatibility problem is impossible. REV ORI costs 99 EUR, the same as this original file. Buy this original file when you need a stock reference or a backup for the same software; use REV ORI when you want your own ECU back to factory.

No. The archive keeps only the software-related part of the ECU: the maps area — the internal flash and/or the external flash, depending on where the software lives in that ECU (this varies by ECU type). EEPROM and other memory sectors are never included, so the file is not a full backup. For a full restore of your own unit, upload your own read to the REV ORI module.

Check that the software number is identical, then compare read type and file size with your read. If anything differs or you are unsure, use the REV ORI module on your own file — it is always compatible — or contact us via WhatsApp or e-mail with your read details before buying.

STAGE1 (99 EUR, automatic, 1 ready solution for this file size); STAGE2 (396 EUR, engineer-assisted, on request); STAGE3 (1980 EUR, engineer-assisted, on request); GPF OFF (198 EUR, engineer-assisted, on request); EGR OFF (50 EUR, engineer-assisted, on request); LAMBDA OFF (50 EUR, engineer-assisted, on request); DECAT (50 EUR, engineer-assisted, on request); NOX OFF (50 EUR, engineer-assisted, on request); VMAX (50 EUR, engineer-assisted, on request); FLAPS OFF (50 EUR, engineer-assisted, on request); MAF OFF (297 EUR, engineer-assisted, on request); STARTSTOP OFF (396 EUR, engineer-assisted, on request); POPBANG (198 EUR, engineer-assisted, on request); POPBANG SWITCH (990 EUR, engineer-assisted, on request); IMMO OFF (495 EUR, engineer-assisted, on request); THERMOSTAT (198 EUR, engineer-assisted, on request); HARDCUT (99 EUR, engineer-assisted, on request); LAUNCH CONTROL (198 EUR, engineer-assisted, on request); DTC OFF (99 EUR, engineer-assisted, on request). Prices are per file.

Yes — 1 completed project run software 90V9025ABB and 1 project were completed on MG1CS221 (BMW - MINI) in total. See the list on this page.

Yes. Sign in to the ECUHARD platform (solutions.ecuhard.com), upload your ECU file, select the operations you need and confirm. Automatic solutions are delivered within minutes, 24/7; engineer-assisted operations are prepared by our tuning team. Every file is checksum-corrected and an invoice is issued automatically.

Yes. The file is linked to ECM Titanium driver B44_E22E (BMW X SERIES (G05) X5 M60). Matched: the software range is identical to the driver reference. The driver tells the software where the maps of this ECU software are, so tools that use ECM drivers, including the ECUHARD Tuning Editor, can open the maps automatically.