EDC17CP01 CR6-642-56S0-204WSM-165kW-EU4OP-006c_ME09 1037389347 1037501656

It is the untouched factory software read from the ECU before any modification. Tuners keep it as a backup and use it as the base for Stage 1/2, DPF/EGR/AdBlue off or DTC removal.

Match by the software number (CR6-642-56S0-204WSM-165kW-EU4OP-006c_ME09, 1037389347, 1037501656) printed on the ECU label or read by your flashing tool. The software number must be identical.

The file costs 10 EUR (one-time). Sign in, open this page and click Buy & Download — the file is sent to your e-mail instantly and stays in your account. An invoice is issued automatically.

Different tools and modes (OBD, bench, boot) read different memory ranges, so an archive file may not be byte-compatible with your read even when the software number matches. Our platform has a REV ORI (revert to original) module: upload the file you read from your own car — no matter which tool or method was used (KTAG, KESS, Flex, Autotuner, CMD, OBD, bench or boot) — and it repairs every modified area back to the stock values and returns your own file. Because it works on your own read, a compatibility problem is impossible. REV ORI costs 10 EUR, the same as this original file.

Compare the software number (CR6-642-56S0-204WSM-165kW-EU4OP-006c_ME09, 1037389347, 1037501656), the read type (OBD) and the file size (2.00 MB) on this page with your own read. If they differ, do not guess: Our platform has a REV ORI (revert to original) module: upload the file you read from your own car — no matter which tool or method was used (KTAG, KESS, Flex, Autotuner, CMD, OBD, bench or boot) — and it repairs every modified area back to the stock values and returns your own file. Because it works on your own read, a compatibility problem is impossible. REV ORI costs 10 EUR, the same as this original file.

You do not need to match the tool. Our platform has a REV ORI (revert to original) module: upload the file you read from your own car — no matter which tool or method was used (KTAG, KESS, Flex, Autotuner, CMD, OBD, bench or boot) — and it repairs every modified area back to the stock values and returns your own file. Because it works on your own read, a compatibility problem is impossible. REV ORI costs 10 EUR, the same as this original file. Buy this original file when you need a stock reference or a backup for the same software; use REV ORI when you want your own ECU back to factory.

No. The archive keeps only the software-related part of the ECU: the maps area — the internal flash and/or the external flash, depending on where the software lives in that ECU (this varies by ECU type). EEPROM and other memory sectors are never included, so the file is not a full backup. For a full restore of your own unit, upload your own read to the REV ORI module.

Check that the software number is identical, then compare read type and file size with your read. If anything differs or you are unsure, use the REV ORI module on your own file — it is always compatible — or contact us via WhatsApp or e-mail with your read details before buying.

STAGE1 (10 EUR, automatic, 1 ready solution for this file size); STAGE2 (40 EUR, engineer-assisted, on request); STAGE3 (200 EUR, engineer-assisted, on request); ADBLUE OFF (5 EUR, engineer-assisted, on request); DPF OFF (5 EUR, automatic, 2 ready solutions for this file size); EGR OFF (5 EUR, automatic, 3 ready solutions for this file size); LAMBDA OFF (5 EUR, automatic, 1 ready solution for this file size); DECAT (5 EUR, engineer-assisted, on request); NOX OFF (5 EUR, engineer-assisted, on request); VMAX OFF (5 EUR, automatic, 1 ready solution for this file size); TVA OFF (5 EUR, automatic, 1 ready solution for this file size); FLAPS OFF (5 EUR, automatic, 2 ready solutions for this file size); MAF OFF (30 EUR, engineer-assisted, on request); STARTSTOP OFF (40 EUR, engineer-assisted, on request); IMMO OFF (50 EUR, engineer-assisted, on request); TERMOSTAT (20 EUR, engineer-assisted, on request); WATERPUMP OFF (5 EUR, engineer-assisted, on request); HOT START (20 EUR, engineer-assisted, on request); REVLIMIT (10 EUR, engineer-assisted, on request); LAUNCH CONTROL (20 EUR, engineer-assisted, on request); READINESS (10 EUR, automatic, 1 ready solution for this file size); DTC OFF (10 EUR, engineer-assisted, on request). Prices are per file.

Yes — 2 completed projects run software CR6-642-56S0-204WSM-165kW-EU4OP-006c_ME09 and 6 projects were completed on EDC17CP01 (MERCEDES) in total. See the list on this page.

Yes. Sign in to the ECUHARD platform (solutions.ecuhard.com), upload your ECU file, select the operations you need and confirm. Automatic solutions are delivered within minutes, 24/7; engineer-assisted operations are prepared by our tuning team. Every file is checksum-corrected and an invoice is issued automatically.

Yes. The file is linked to ECM Titanium driver C30_7C29 (MERCEDES C). Matched: the software range is identical to the driver reference. The driver tells the software where the maps of this ECU software are, so tools that use ECM drivers, including the ECUHARD Tuning Editor, can open the maps automatically.