ECUHARD
Recent Projects
Sign In
Project #25007

EDC17C84 MCE3BE41073E26GE41073 10SW018690 EDC17C84_RENAULT

RENAULT - NISSAN Car Diesel DPF OFF + EGR OFF + LAMBDA OFF + DTC OFF ✓ Completed Oct 22, 2026

Vehicle & ECU

ECUEDC17C84
Brand groupRENAULT - NISSAN
Vehicle typeCar
FuelDiesel
File size2.50 MB 2,621,440 bytes
Completed
Automated processing≈ 25 min
Status✓ Completed & delivered
Original filenissan_bosch_edc17c84_obd_maps_sjnfdaj11u1318627_20261022161830.bin
Stock fileStock file in ORI archive (#53800) →

ECM Titanium

Driver · Vehicle · ECUN16_F055 · NISSAN XTRAIL (T32) · EDC17C84

Software identification 3

Software numberMCE3BE41073E26GE41073
Identifier 210SW018690
Identifier 3EDC17C84_RENAULT

Operations performed 4

  1. DPF OFF automated · solution rev 24 · ~5 min

    Deletes the diesel particulate filter (DPF) system in software; if the DPF and AdBlue (SCR) share one housing, AdBlue must be deleted as well.

  2. EGR OFF automated · solution rev 26 · ~5 min

    Disables the exhaust gas recirculation (EGR) system.

  3. LAMBDA OFF automated · solution rev 17 · ~5 min

    Disables the oxygen (lambda) sensors.

  4. DTC OFF automated · solution rev 1 · ~10 min

    Permanently disables the fault codes (DTC) you select; you need to provide the P codes to turn off.

    • P0135O2=Sensor Heater Circuit Bank 1 Sensor 1
    • P1401DPFE Circuit High Input
    • P1485EGRV Circuit Malfunction
    • P1486EGRA Circuit Malfunction
    • P1487EGRCHK Solenoid Circuit Malfunction
    • P1488Egr valve low pressure blocked
    • P1489EGR Flow Insufficient Detected
    • P148FLow Pressure EGR Valve Poistion Sensor, Implausible Signal
    • P2243O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1
    • P2244O2 Sensor Reference Voltage Performance Bank 1 Sensor 1
    • P22B2O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 2
    • P22B3O2 Sensor Negative Current Control Circuit Low Bank 1 Sensor 2
    • P22B6O2 Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 2
    • P22B7O2 Sensor Pumping Current Trim Circuit High Bank 1 Sensor 2
    • P22B8O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 2
    • P22B9O2 Sensor Positive Current Control Circuit Low Bank 2 Sensor 2
    • P22BAO2 Sensor Positive Current Control Circuit High Bank 2 Sensor 2
    • P22BBO2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 2
    • P2417O2=Sensor Signals Swapped Bank 2 Sensor 2 / Bank 2 Sensor 3
    • P244DExhaust Temperature Too High For Particulate Filter Regeneration Bank 1
    • P2452DPF pressure sensor A circuit
    • P2454DPF pressure sensor A circuit low
    • P2455DPF pressure sensor A circuit high
    • P24F2EGR Temperature/Charge Air Cooler Temperature Correlation
    • P2626O2=Sensor Pumping Current Trim Circuit/Open Bank 1 Sensor 1
    • P2A06O2 Sensor Negative Voltage Bank 1 Sensor 1

Other solutions for this ECU 11

Every operation below can be ordered for the same EDC17C84 file (diesel). Prices are per file in EUR; automatic solutions are delivered within minutes, engineer-assisted ones are prepared by our tuning team.

STAGE1 A performance tune that needs no mechanical changes and stays within the factory safety limits. automatic, 30 ready solutions for this file size · ~15 min 30 EUR
STAGE2 A performance tune for vehicles with hardware upgrades such as a downpipe, intercooler or intake; DPF/EGR delete is a separate operation. automatic, 2 ready solutions for this file size · ~60 min 60 EUR
ADBLUE OFF Disables the AdBlue (SCR) system in software; no AdBlue refills are needed afterwards. automatic, 13 ready solutions for this file size · ~10 min 15 EUR
DPF OFF Deletes the diesel particulate filter (DPF) system in software; if the DPF and AdBlue (SCR) share one housing, AdBlue must be deleted as well. done in this project ✓
EGR OFF Disables the exhaust gas recirculation (EGR) system. done in this project ✓
LAMBDA OFF Disables the oxygen (lambda) sensors. done in this project ✓
DECAT Disables catalytic converter efficiency monitoring and the P0420/P0430 fault codes. automatic, 3 ready solutions for this file size · ~5 min 15 EUR
NOX OFF Disables the NOx sensor. automatic, 4 ready solutions for this file size · ~5 min 15 EUR
VMAX Removes the speed limiter (Vmax) or sets it to the desired value. automatic, 6 ready solutions for this file size · ~5 min 15 EUR
TVA OFF Disables the diesel throttle valve. automatic, 4 ready solutions for this file size · ~5 min 15 EUR
FLAPS OFF Disables the swirl flaps in the intake manifold. automatic, 5 ready solutions for this file size · ~5 min 15 EUR
STARTSTOP OFF Permanently disables the Start/Stop system. automatic, 2 ready solutions for this file size · ~20 min 60 EUR
HARDCUT Sets the engine hardcut (rev cut) point. automatic, 2 ready solutions for this file size · ~20 min 15 EUR
DTC OFF Permanently disables the fault codes (DTC) you select; you need to provide the P codes to turn off. done in this project ✓
REV ORI Restores your modified software file to its original factory state. automatic, stock file in archive · ~120 min 15 EUR
Have a EDC17C84 file? Sign in to the ECUHARD platform, upload it and pick the operations — automatic solutions are ready in minutes, 24/7, invoice issued automatically.
Sign in & upload your file →

About this project

Bosch EDC17 is a widely used common-rail diesel ECU generation (Euro 4–6) with DFES fault-code tables. This unit is fitted to RENAULT - NISSAN Car vehicles. Project #25007 was completed automatically by the ECUHARD file service for a RENAULT - NISSAN Car vehicle running software MCE3BE41073E26GE41073 10SW018690 EDC17C84_RENAULT. Disabled fault codes: P0135, P1401, P1485, P1486, P1487, P1488, P1489, P148F, P2243, P2244, P22B2, P22B3, P22B6, P22B7, P22B8, P22B9, P22BA, P22BB, P2417, P244D, P2452, P2454, P2455, P24F2, P2626, P2A06.

Frequently asked questions

What was done to this EDC17C84 file?

Operations performed: DPF OFF, EGR OFF, LAMBDA OFF, DTC OFF. The modified file was checksum-corrected and delivered ready to flash.

Which fault codes (DTC) were disabled?

P0135 (O2=Sensor Heater Circuit Bank 1 Sensor 1); P1401 (DPFE Circuit High Input); P1485 (EGRV Circuit Malfunction); P1486 (EGRA Circuit Malfunction); P1487 (EGRCHK Solenoid Circuit Malfunction); P1488 (Egr valve low pressure blocked); P1489 (EGR Flow Insufficient Detected); P148F (Low Pressure EGR Valve Poistion Sensor, Implausible Signal); P2243 (O2 Sensor Reference Voltage Circuit/Open Bank 1 Sensor 1); P2244 (O2 Sensor Reference Voltage Performance Bank 1 Sensor 1); P22B2 (O2 Sensor Negative Current Control Circuit/Open Bank 1 Sensor 2); P22B3 (O2 Sensor Negative Current Control Circuit Low Bank 1 Sensor 2); P22B6 (O2 Sensor Pumping Current Trim Circuit Low Bank 1 Sensor 2); P22B7 (O2 Sensor Pumping Current Trim Circuit High Bank 1 Sensor 2); P22B8 (O2 Sensor Positive Current Control Circuit/Open Bank 2 Sensor 2); P22B9 (O2 Sensor Positive Current Control Circuit Low Bank 2 Sensor 2); P22BA (O2 Sensor Positive Current Control Circuit High Bank 2 Sensor 2); P22BB (O2 Sensor Reference Voltage Circuit/Open Bank 2 Sensor 2); P2417 (O2=Sensor Signals Swapped Bank 2 Sensor 2 / Bank 2 Sensor 3); P244D (Exhaust Temperature Too High For Particulate Filter Regeneration Bank 1); P2452 (DPF pressure sensor A circuit); P2454 (DPF pressure sensor A circuit low); P2455 (DPF pressure sensor A circuit high); P24F2 (EGR Temperature/Charge Air Cooler Temperature Correlation); P2626 (O2=Sensor Pumping Current Trim Circuit/Open Bank 1 Sensor 1); P2A06 (O2 Sensor Negative Voltage Bank 1 Sensor 1). Each code is switched off in the ECU fault table, so it is no longer stored or shown by diagnostic tools.

What is the software version for this EDC17C84 file?

This project is for EDC17C84 with software numbers: MCE3BE41073E26GE41073, 10SW018690, EDC17C84_RENAULT. The same operations apply to other vehicles running the same software.

Can I get the same tuning for my RENAULT - NISSAN?

Yes. Sign in, upload your original ECU file (EDC17C84 or any supported ECU), choose the operations you need and our automated system prepares the file, usually within minutes, 24/7.

I read my ECU with a different tool — will the tuning fit my file?

Yes. Every operation is applied to the file you upload — your own read from your own car — so the tool and the read mode do not matter: the modifications are located by content, not by a fixed file layout. If your file was modified before, our REV ORI (revert to original) module repairs every changed area back to the stock values first — no matter which tool or method read it (KTAG, KESS, Flex, Autotuner, CMD, OBD, bench or boot) (15 EUR). A compatibility problem is therefore impossible.

I have an OBD read — can you tune it, or do I need a bench/boot read?

An OBD read is fine as long as it contains the software area (maps). Upload it; the platform detects the ECU and software number and shows which operations are available for your file. If the read is partial and an operation is not possible on it, you will see that before paying.

I read boot mode with KTAG / bench with Flex / bench or OBD with Autotuner — which read do I upload?

Any of them. Upload the file exactly as your tool saved it (EDC17C84 reads are supported in OBD, bench and boot form). The system works on your own read, so nothing has to be converted or matched to a different device.

Do you need the full backup (EEPROM, other sectors)?

No. Only the software-related part of the ECU is used: the maps area — the internal flash and/or the external flash, depending on where the software lives in that ECU. EEPROM and other memory sectors are not needed and are never modified. Keep your full backup for yourself as a safety copy.

How can I be sure the result will be compatible with my ECU?

Because the file returned to you is your own read with only the selected areas changed and the checksum corrected, it flashes back with the same tool and method you used to read it. The software number stays the same; nothing else in the file is touched.

What other operations are available for EDC17C84?

STAGE1 (30 EUR, automatic, 30 ready solutions for this file size); STAGE2 (60 EUR, automatic, 2 ready solutions for this file size); ADBLUE OFF (15 EUR, automatic, 13 ready solutions for this file size); DECAT (15 EUR, automatic, 3 ready solutions for this file size); NOX OFF (15 EUR, automatic, 4 ready solutions for this file size); VMAX (15 EUR, automatic, 6 ready solutions for this file size); TVA OFF (15 EUR, automatic, 4 ready solutions for this file size); FLAPS OFF (15 EUR, automatic, 5 ready solutions for this file size); STARTSTOP OFF (60 EUR, automatic, 2 ready solutions for this file size); HARDCUT (15 EUR, automatic, 2 ready solutions for this file size); REV ORI (15 EUR, automatic, stock file in archive). Prices are per file.

I have a EDC17C84 file — how can I get it done?

Sign in to the ECUHARD platform (solutions.ecuhard.com), upload your ECU file, select the operations you need and confirm. Automatic solutions are delivered within minutes, 24/7; engineer-assisted operations are prepared by our tuning team. Each file is checksum-corrected and an invoice is issued automatically.

Is there an ECM Titanium driver for this EDC17C84 file?

Yes. The file is linked to ECM Titanium driver N16_F055 (NISSAN XTRAIL (T32)). Matched: the software range is identical to the driver reference. The driver tells the software where the maps of this ECU software are, so tools that use ECM drivers, including the ECUHARD Tuning Editor, can open the maps automatically.

Do I need to send my original file?

Yes — upload the stock read of your ECU. If you do not have it, our original file archive may have a matching file by software number.