2
Automatic module ECUs
Service
ECU file service
Live data
RAIL SENSOR CALIBRATION ECU file service
Performs the coding required when you upgrade to a larger rail (fuel pressure) sensor.
1
Engineer-made solutions
1
ECU types
1
Brand groups
3
Times applied
01 How it works
- Upload the original read of your ECU. The system detects the ECU and software (SW) number.
- Select RAIL SENSOR CALIBRATION. If your ECU has a built-in automatic module, you choose the options you want and the module builds the change directly in your file.
- For other ECUs the file is compared, byte by byte and by SW number, with our stored engineer-made solutions and the matching solution is applied. Jobs without a match go to an engineer.
- Download the finished file. The system works 24/7, also at night and on weekends.
02 Automatic module
RAIL SENSOR CALIBRATION is available as a built-in automatic module for 2 ECU types. You do not need a stored solution: you enter the options you want — and the module builds the change directly in your own file, correct for that ECU.
03 Written by engineers, tested on a dyno
Every stored RAIL SENSOR CALIBRATION solution is written by our engineers with professional tuning tools — WinOLS, StageX, ECM Titanium and our own Tuning Editor — and the file is tested on a dyno before it is added to the system and sent to customers. When your job matches a stored solution, the system applies it automatically, so what you receive is a solution that an engineer has already written and tested. 1 such solutions have been applied 3 times so far.
04 Brand groups with RAIL SENSOR CALIBRATION solutions (stored solutions)
05 ECU types with the most RAIL SENSOR CALIBRATION solutions
06 Related services
STAGE1
A safe performance tune that needs no mechanical changes and does not harm the vehicle.
EGR OFF
Disables the exhaust gas recirculation (EGR) system.
DPF OFF
Deletes the diesel particulate filter (DPF) system in software; if the vehicle has AdBlue, it must be deleted first.
LAMBDA OFF
Disables the oxygen (lambda) sensors.
VMAX OFF
Removes the speed limiter (Vmax) or sets it to the desired value.
ADBLUE OFF
Disables the AdBlue (SCR) system in software; no AdBlue refills are needed afterwards.
Frequently asked questions
What is RAIL SENSOR CALIBRATION?
Performs the coding required when you upgrade to a larger rail (fuel pressure) sensor.
Is there an automatic module for RAIL SENSOR CALIBRATION?
Yes. RAIL SENSOR CALIBRATION is available as a built-in automatic module for 2 ECU types (listed on this page). You choose the options you want in the panel and the module builds the change directly in your own file, so no stored solution is needed for those ECUs.
Which vehicles support RAIL SENSOR CALIBRATION?
We have 1 engineer-made RAIL SENSOR CALIBRATION solutions covering 1 ECU types across 1 brand groups. The lists on this page show the brand groups and ECU types with the most solutions.
How do I order RAIL SENSOR CALIBRATION?
Sign in, upload the original read of your ECU, choose RAIL SENSOR CALIBRATION and download the finished file. Checksum correction is a separate, optional operation (CHECKSUM OK) on supported ECUs. Where we already have a matching solution the file is processed automatically; other jobs are handled by an engineer.
Are the solutions tested?
Yes. Our engineers write every solution with professional tuning tools and test each file on a dyno before it is added to the system.
Ready for RAIL SENSOR CALIBRATION?
Create a free account, upload your ECU file and get it back processed in minutes — AI-assisted, 24/7, every day of the week.
Get Started Now