THERMOSTAT ECU file service

01 How it works

1. Upload the original read of your ECU. The system detects the ECU and software (SW) number.
2. Select THERMOSTAT. The file is compared, byte by byte and by SW number, with our stored engineer-made solutions.
3. On a match the solution is applied automatically. Jobs without a match go to an engineer. Checksum correction is a separate, optional operation (CHECKSUM) on supported ECUs.
4. Download the finished file. The system works 24/7, also at night and on weekends.

02 Written by engineers, tested on a dyno

Every stored THERMOSTAT solution is written by our engineers with professional tuning tools — WinOLS, StageX, ECM Titanium and our own Tuning Editor — and the file is tested on a dyno before it is added to the system and sent to customers. When your job matches a stored solution, the system applies it automatically, so what you receive is a solution that an engineer has already written and tested. 75 such solutions have been applied 615 times so far.

03 Brand groups with THERMOSTAT solutions

BMW - MINI 36 solutions OPEL - VAUXHALL 31 solutions PEUGEOT - CITROEN 7 solutions KIA - HYUNDAI 1 solutions

04 ECU types with the most THERMOSTAT solutions

MED17.2 - MEV17.2 - MEVD17.2BMW - MINI 20 solutions E78OPEL - VAUXHALL 12 solutions E83OPEL - VAUXHALL 10 solutions MED17.4 - MEV17.4 - MEVD17.4PEUGEOT - CITROEN 7 solutions MS42BMW - MINI 5 solutions DELCO MULTECOPEL - VAUXHALL 5 solutions MSD - MSVBMW - MINI 3 solutions SIMTECOPEL - VAUXHALL 3 solutions MG1CS003BMW - MINI 2 solutions ME17.2BMW - MINI 2 solutions EDC16C1 - EDC16C31 - EDC16C35 - EDC16CP35BMW - MINI 1 solutions EDC17C06 - EDC17C41 - EDC17C50 - EDC17C56BMW - MINI 1 solutions MS43BMW - MINI 1 solutions EDC16C39KIA - HYUNDAI 1 solutions MS45BMW - MINI 1 solutions E80OPEL - VAUXHALL 1 solutions

05 Related services

STAGE1

A performance tune that needs no mechanical changes and stays within the factory safety limits.

EGR OFF

Disables the exhaust gas recirculation (EGR) system.

DPF OFF

Deletes the diesel particulate filter (DPF) system in software; if the DPF and AdBlue (SCR) share one housing, AdBlue must be deleted as well.

LAMBDA OFF

Disables the oxygen (lambda) sensors.

VMAX

Removes the speed limiter (Vmax) or sets it to the desired value.

ADBLUE OFF

Disables the AdBlue (SCR) system in software; no AdBlue refills are needed afterwards.