Project #17084

EDC17C74 04L906027R 7074 04L907309P

VW - AUDI - SEAT - SKODA - PORSCHE Car Diesel DTC OFF ✓ Completed Aug 12, 2026

Vehicle & ECU

Vehicle typeCar
FuelDiesel
File size4.00 MB 4,194,304 bytes
Completed
Automated processing≈ 10 min
Status✓ Completed & delivered
Original filevag_bosch_edc17c74_bench_intflash_41488c03ce03b121190c002011000000_20260721111713_int_flash_REVORI (1).bin

Software identification 3

Software number04L906027R
Version / upgrade7074
Identifier 204L907309P

Operations performed 1

  1. DTC OFF automated · solution rev 1 · ~10 min

    Permanently disables the fault codes (DTC) you select; you need to provide the P codes to turn off.

    • P0090Fuel Pressure Regulator 1 Control Circuit
    • P0122Throttle/Pedal Position Sensor/Switch "A" Circuit Low
    • P0183Fuel Temperature Sensor A Circuit High
    • P0193Fuel Rail Pressure Sensor Circuit High
    • P0238Turbo/Super Charger Boost Sensor "A" Circuit High
    • P0400Exhaust Gas Recirculation Flow
    • P0401Exhaust Gas Recirculation Flow Insufficient Detected
    • P0402Exhaust Gas Recirculation Flow Excessive Detected
    • P0403Exhaust Gas Recirculation Control Circuit
    • P0404Exhaust Gas Recirculation Control Circuit Range/Performance
    • P0405Exhaust Gas Recirculation Sensor "A" Circuit Low
    • P0406Exhaust Gas Recirculation Sensor "A" Circuit High
    • P0470Exhaust Pressure Sensor
    • P0471Exhaust Pressure Sensor Range/Performance
    • P0472Exhaust Pressure Sensor Low
    • P0474Exhaust Pressure Sensor Intermittent
    • P0475Exhaust Pressure Control Valve
    • P0476Exhaust Pressure Control Valve Range/Performance
    • P0477Exhaust Pressure Control Valve Low
    • P0478Exhaust Pressure Control Valve High
    • P047FExhaust Pressure Control Valve "A" Stuck Open
    • P0486Exhaust Gas Recirculation Sensor "B" Circuit
    • P0488Exhaust Gas Recirculation Throttle Position Control Range/Performance
    • P048AExhaust Pressure Control Valve "A" Stuck Closed
    • P048BExhaust Pressure Control Valve "A" Position Sensor/Switch Circuit
    • P048CExhaust Pressure Control Valve "A" Position Sensor/Switch Circuit Range/Performance
    • P048EExhaust Pressure Control Valve "A" Position Sensor/Switch Circuit High
    • P050ECold Start Engine Exhaust Temperature Too Low
    • P0544Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 1
    • P0545Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 1
    • P2031Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 2
    • P2032Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 2
    • P2080Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 1
    • P2082Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 1
    • P2084Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 2
    • P2294Fuel Pressure Regulator 2 Control Circuit
    • P2425Exhaust Gas Recirculation Cooling Valve Control Circuit/Open
    • P2426Exhaust Gas Recirculation Cooling Valve Control Circuit Low
    • P2427Exhaust Gas Recirculation Cooling Valve Control Circuit High
    • P242AExhaust Gas Temperature Sensor Circuit Bank 1 Sensor 3
    • P242BExhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 3
    • P242CExhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 3
    • P244CExhaust Temperature Too Low For Particulate Filter Regeneration Bank 1
    • P246EExhaust Gas Temperature Sensor Circuit Bank 1 Sensor 4
    • P246FExhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4
    • P2470Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 4
    • P2478Exhaust Gas Temperature Out of Range Bank 1 Sensor 1
    • P247AExhaust Gas Temperature Out of Range Bank 1 Sensor 3
    • P247BExhaust Gas Temperature Out of Range Bank 1 Sensor 4
    • P26F2Starter Relay "B" Stuck On
    • P26F4Coolant Pump "C" Control Circuit/Open
    • P26F5Coolant Pump "C" Control Circuit Low
    • P26F6Coolant Pump "C" Control Circuit High
    • P26F7Coolant Pump "C" Supply Voltage Circuit
    • P26F8Coolant Pump "C" Stuck/Stalled
    • P26F9Coolant Pump "C" Control Module Overtemperature
    • P26FACoolant Pump "C" Overspeed/Air in System
    • P2BD2Exhaust Aftertreatment System "A" Leak

Other solutions for this ECU 17

Every operation below can be ordered for the same EDC17C74 file (diesel). Prices are per file in EUR; automatic solutions are delivered within minutes, engineer-assisted ones are prepared by our tuning team.

STAGE1 A safe performance tune that needs no mechanical changes and does not harm the vehicle. automatic, 41 ready solutions for this file size · ~15 min 10 EUR
STAGE2 A performance tune that requires hardware changes such as exhaust, filter or DPF removal. automatic, 8 ready solutions for this file size · ~60 min 40 EUR
STAGE3 A performance tune built from data logs after vehicle-specific hardware upgrades. automatic, 1 ready solution for this file size · ~180 min 200 EUR
ADBLUE OFF Disables the AdBlue (SCR) system in software; no AdBlue refills are needed afterwards. automatic, 34 ready solutions for this file size · ~10 min 5 EUR
DPF OFF Deletes the diesel particulate filter (DPF) system in software; if the vehicle has AdBlue, it must be deleted first. automatic, 31 ready solutions for this file size · ~5 min 5 EUR
EGR OFF Disables the exhaust gas recirculation (EGR) system. automatic, 30 ready solutions for this file size · ~5 min 5 EUR
LAMBDA OFF Disables the oxygen (lambda) sensors. automatic, 16 ready solutions for this file size · ~5 min 5 EUR
DECAT Disables catalytic converter efficiency monitoring and the P0420/P0430 fault codes. automatic, 10 ready solutions for this file size · ~5 min 5 EUR
NOX OFF Disables the NOx sensor. automatic, 21 ready solutions for this file size · ~5 min 5 EUR
VMAX OFF Removes the speed limiter (Vmax) or sets it to the desired value. automatic, 21 ready solutions for this file size · ~5 min 5 EUR
TVA OFF Disables the diesel throttle valve. automatic, 15 ready solutions for this file size · ~5 min 5 EUR
FLAPS OFF Disables the swirl flaps in the intake manifold. automatic, 15 ready solutions for this file size · ~5 min 5 EUR
STARTSTOP OFF Permanently disables the Start/Stop system. automatic, 4 ready solutions for this file size · ~20 min 40 EUR
IMMO OFF automatic, 5 ready solutions for this file size · ~180 min 50 EUR
WATERPUMP OFF Disables the water pump fault code. automatic, 11 ready solutions for this file size · ~5 min 5 EUR
REVLIMIT Adjusts the engine rev limiter (hard cut) point. automatic, 3 ready solutions for this file size · ~20 min 10 EUR
DTC OFF Permanently disables the fault codes (DTC) you select; you need to provide the P codes to turn off. done in this project
REV ORI automatic, stock file in archive · ~120 min 10 EUR
Have a EDC17C74 file? Sign in to the ECUHARD platform, upload it and pick the operations — automatic solutions are ready in minutes, 24/7, invoice issued automatically.
Sign in & upload your file →

About this project

Bosch EDC17 is a widely used common-rail diesel ECU generation (Euro 4–6) with DFES fault-code tables. This unit is fitted to VW - AUDI - SEAT - SKODA - PORSCHE Car vehicles. Project #17084 was completed automatically by the ECUHARD file service for a VW - AUDI - SEAT - SKODA - PORSCHE Car vehicle running software 04L906027R 7074 04L907309P. Disabled fault codes: P0090, P0122, P0183, P0193, P0238, P0400, P0401, P0402, P0403, P0404, P0405, P0406, P0470, P0471, P0472, P0474, P0475, P0476, P0477, P0478, P047F, P0486, P0488, P048A, P048B, P048C, P048E, P050E, P0544, P0545, P2031, P2032, P2080, P2082, P2084, P2294, P2425, P2426, P2427, P242A, P242B, P242C, P244C, P246E, P246F, P2470, P2478, P247A, P247B, P26F2, P26F4, P26F5, P26F6, P26F7, P26F8, P26F9, P26FA, P2BD2.

Frequently asked questions

What was done to this EDC17C74 file?

Operations performed: DTC OFF. The modified file was checksum-corrected and delivered ready to flash.

Which fault codes (DTC) were disabled?

P0090 (Fuel Pressure Regulator 1 Control Circuit); P0122 (Throttle/Pedal Position Sensor/Switch "A" Circuit Low); P0183 (Fuel Temperature Sensor A Circuit High); P0193 (Fuel Rail Pressure Sensor Circuit High); P0238 (Turbo/Super Charger Boost Sensor "A" Circuit High); P0400 (Exhaust Gas Recirculation Flow); P0401 (Exhaust Gas Recirculation Flow Insufficient Detected); P0402 (Exhaust Gas Recirculation Flow Excessive Detected); P0403 (Exhaust Gas Recirculation Control Circuit); P0404 (Exhaust Gas Recirculation Control Circuit Range/Performance); P0405 (Exhaust Gas Recirculation Sensor "A" Circuit Low); P0406 (Exhaust Gas Recirculation Sensor "A" Circuit High); P0470 (Exhaust Pressure Sensor); P0471 (Exhaust Pressure Sensor Range/Performance); P0472 (Exhaust Pressure Sensor Low); P0474 (Exhaust Pressure Sensor Intermittent); P0475 (Exhaust Pressure Control Valve); P0476 (Exhaust Pressure Control Valve Range/Performance); P0477 (Exhaust Pressure Control Valve Low); P0478 (Exhaust Pressure Control Valve High); P047F (Exhaust Pressure Control Valve "A" Stuck Open); P0486 (Exhaust Gas Recirculation Sensor "B" Circuit); P0488 (Exhaust Gas Recirculation Throttle Position Control Range/Performance); P048A (Exhaust Pressure Control Valve "A" Stuck Closed); P048B (Exhaust Pressure Control Valve "A" Position Sensor/Switch Circuit); P048C (Exhaust Pressure Control Valve "A" Position Sensor/Switch Circuit Range/Performance); P048E (Exhaust Pressure Control Valve "A" Position Sensor/Switch Circuit High); P050E (Cold Start Engine Exhaust Temperature Too Low); P0544 (Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 1); P0545 (Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 1); P2031 (Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 2); P2032 (Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 2); P2080 (Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 1); P2082 (Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 2 Sensor 1); P2084 (Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 2); P2294 (Fuel Pressure Regulator 2 Control Circuit); P2425 (Exhaust Gas Recirculation Cooling Valve Control Circuit/Open); P2426 (Exhaust Gas Recirculation Cooling Valve Control Circuit Low); P2427 (Exhaust Gas Recirculation Cooling Valve Control Circuit High); P242A (Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 3); P242B (Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 3); P242C (Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 3); P244C (Exhaust Temperature Too Low For Particulate Filter Regeneration Bank 1); P246E (Exhaust Gas Temperature Sensor Circuit Bank 1 Sensor 4); P246F (Exhaust Gas Temperature Sensor Circuit Range/Performance Bank 1 Sensor 4); P2470 (Exhaust Gas Temperature Sensor Circuit Low Bank 1 Sensor 4); P2478 (Exhaust Gas Temperature Out of Range Bank 1 Sensor 1); P247A (Exhaust Gas Temperature Out of Range Bank 1 Sensor 3); P247B (Exhaust Gas Temperature Out of Range Bank 1 Sensor 4); P26F2 (Starter Relay "B" Stuck On); P26F4 (Coolant Pump "C" Control Circuit/Open); P26F5 (Coolant Pump "C" Control Circuit Low); P26F6 (Coolant Pump "C" Control Circuit High); P26F7 (Coolant Pump "C" Supply Voltage Circuit); P26F8 (Coolant Pump "C" Stuck/Stalled); P26F9 (Coolant Pump "C" Control Module Overtemperature); P26FA (Coolant Pump "C" Overspeed/Air in System); P2BD2 (Exhaust Aftertreatment System "A" Leak). Each code is switched off in the ECU fault table, so it is no longer stored or shown by diagnostic tools.

What is the software version for this EDC17C74 file?

This project is for EDC17C74 with software numbers: 04L906027R 7074, 04L907309P. The same operations apply to other vehicles running the same software.

Can I get the same tuning for my VW - AUDI - SEAT - SKODA - PORSCHE?

Yes. Sign in, upload your original ECU file (EDC17C74 or any supported ECU), choose the operations you need and our automated system prepares the file, usually within minutes, 24/7.

I read my ECU with a different tool — will the tuning fit my file?

Yes. Every operation is applied to the file you upload — your own read from your own car — so the tool and the read mode do not matter: the modifications are located by content, not by a fixed file layout. If your file was modified before, our REV ORI (revert to original) module repairs every changed area back to the stock values first — no matter which tool or method read it (KTAG, KESS, Flex, Autotuner, CMD, OBD, bench or boot) (10 EUR). A compatibility problem is therefore impossible.

I have an OBD read — can you tune it, or do I need a bench/boot read?

An OBD read is fine as long as it contains the software area (maps). Upload it; the platform detects the ECU and software number and shows which operations are available for your file. If the read is partial and an operation is not possible on it, you will see that before paying.

I read boot mode with KTAG / bench with Flex / bench or OBD with Autotuner — which read do I upload?

Any of them. Upload the file exactly as your tool saved it (EDC17C74 reads are supported in OBD, bench and boot form). The system works on your own read, so nothing has to be converted or matched to a different device.

Do you need the full backup (EEPROM, other sectors)?

No. Only the software-related part of the ECU is used: the maps area — the internal flash and/or the external flash, depending on where the software lives in that ECU. EEPROM and other memory sectors are not needed and are never modified. Keep your full backup for yourself as a safety copy.

How can I be sure the result will be compatible with my ECU?

Because the file returned to you is your own read with only the selected areas changed and the checksum corrected, it flashes back with the same tool and method you used to read it. The software number stays the same; nothing else in the file is touched.

What other operations are available for EDC17C74?

STAGE1 (10 EUR, automatic, 41 ready solutions for this file size); STAGE2 (40 EUR, automatic, 8 ready solutions for this file size); STAGE3 (200 EUR, automatic, 1 ready solution for this file size); ADBLUE OFF (5 EUR, automatic, 34 ready solutions for this file size); DPF OFF (5 EUR, automatic, 31 ready solutions for this file size); EGR OFF (5 EUR, automatic, 30 ready solutions for this file size); LAMBDA OFF (5 EUR, automatic, 16 ready solutions for this file size); DECAT (5 EUR, automatic, 10 ready solutions for this file size); NOX OFF (5 EUR, automatic, 21 ready solutions for this file size); VMAX OFF (5 EUR, automatic, 21 ready solutions for this file size); TVA OFF (5 EUR, automatic, 15 ready solutions for this file size); FLAPS OFF (5 EUR, automatic, 15 ready solutions for this file size); STARTSTOP OFF (40 EUR, automatic, 4 ready solutions for this file size); IMMO OFF (50 EUR, automatic, 5 ready solutions for this file size); WATERPUMP OFF (5 EUR, automatic, 11 ready solutions for this file size); REVLIMIT (10 EUR, automatic, 3 ready solutions for this file size); REV ORI (10 EUR, automatic, stock file in archive). Prices are per file.

I have a EDC17C74 file — how can I get it done?

Sign in to the ECUHARD platform (solutions.ecuhard.com), upload your ECU file, select the operations you need and confirm. Automatic solutions are delivered within minutes, 24/7; engineer-assisted operations are prepared by our tuning team. Each file is checksum-corrected and an invoice is issued automatically.

Do I need to send my original file?

Yes — upload the stock read of your ECU. If you do not have it, our original file archive may have a matching file by software number.