CHECKSUM ECU file service

01 How it works

1. Upload the original read of your ECU. The system detects the ECU and software (SW) number.
2. Select CHECKSUM. The checksum module for your ECU recalculates your file's checksum automatically.
3. Your file is returned with the corrected checksum. If your ECU has no checksum module, the file is left unchanged and the checksum stays with your own tool.
4. Download the finished file. The system works 24/7, also at night and on weekends.

02 Automatic module

Checksum correction is handled by built-in checksum modules for 63 ECU types. The module recalculates the checksum of your own modified file automatically.

EDC15C4BMW - MINI module EDC16C1 - EDC16C31 - EDC16C35 - EDC16CP35BMW - MINI module ME9.2BMW - MINI module MS41BMW - MINI module MS42BMW - MINI module MS43BMW - MINI module MS45BMW - MINI module 8F2 - 8F3 - 8DFFIAT - ALFA - JEEP module 9DFFIAT - ALFA - JEEP module EDC15FIAT - ALFA - JEEP module EDC16C39 - EDC16CP39FIAT - ALFA - JEEP module DCM 3.4 MCP555FORD module EDC16C34FORD module SID208FORD module SID209FORD module SID211FORD module SID80XFORD module VISTEON DCU102FORD module EDC16C31HONDA module EDC16C7HONDA module EDC16C39IVECO module EDC15KIA - HYUNDAI module EDC16C39KIA - HYUNDAI module CRD2X - CRD3XMERCEDES module EDC16C2 - EDC16C31 - EDC16C35MERCEDES module EDC16CP31MERCEDES module ME2.8MERCEDES module ME9.7 - MED9.7MERCEDES module SID307MERCEDES module SID310MERCEDES module + 33 more ECU typessee catalog

03 Written by engineers, tested on a dyno

Every stored CHECKSUM solution is written by our engineers with professional tuning tools — WinOLS, StageX, ECM Titanium and our own Tuning Editor — and the file is tested on a dyno before it is added to the system and sent to customers. When your job matches a stored solution, the system applies it automatically, so what you receive is a solution that an engineer has already written and tested. 2 such solutions have been applied 1 times so far.

04 Brand groups with CHECKSUM solutions

PEUGEOT - CITROEN 1 solutions VW - AUDI - SEAT - SKODA - PORSCHE 1 solutions

05 ECU types with the most CHECKSUM solutions

EDC17C60PEUGEOT - CITROEN 1 solutions MARELLI IAWVW - AUDI - SEAT - SKODA - PORSCHE 1 solutions

06 Related services

DTC OFF

Permanently disables the fault codes (DTC) you select; you need to provide the P codes to turn off.

IMMO OFF

Disables the immobilizer system so the vehicle can start and run.

MISFIRE OFF

Disables misfire fault detection caused by the ignition system.

KNOCK OFF

Disables the knock sensor on supported models.

HOT START

Fixes the rough/delayed starting issue (hot start) that occurs when the engine is hot.

COLDSTART OFF

Disables the cold-start program that raises idle and runs the engine loudly during warm-up.