IMMO OFF ECU file service
Disables the immobilizer system so the vehicle can start and run.
01 How it works
- Upload the original read of your ECU. The system detects the ECU and software (SW) number.
- Select IMMO OFF. If your ECU has a built-in automatic module, you choose the options you want and the module builds the change directly in your file.
- For other ECUs the file is compared, byte by byte and by SW number, with our stored engineer-made solutions and the matching solution is applied. Jobs without a match go to an engineer.
- Download the finished file. The system works 24/7, also at night and on weekends.
02 Automatic module
IMMO OFF is available as a built-in automatic module for 2 ECU types. You do not need a stored solution: you enter the options you want — and the module builds the change directly in your own file, correct for that ECU.
03 Written by engineers, tested on a dyno
Every stored IMMO OFF solution is written by our engineers with professional tuning tools — WinOLS, StageX, ECM Titanium and our own Tuning Editor — and the file is tested on a dyno before it is added to the system and sent to customers. When your job matches a stored solution, the system applies it automatically, so what you receive is a solution that an engineer has already written and tested. 177 such solutions have been applied 275 times so far.
04 Brand groups with IMMO OFF solutions (stored solutions)
05 ECU types with the most IMMO OFF solutions
06 Related services
DTC OFF
Permanently disables the fault codes (DTC) you select; you need to provide the P codes to turn off.
CHECKSUM OK
Automatically calculates and corrects your modified file’s checksum; if your tool cannot do checksums, we do it for you.
KNOCK OFF
Disables the knock sensor on supported models.
HOT START
Fixes the rough/delayed starting issue (hot start) that occurs when the engine is hot.
COLD START DELETE
Disables the cold-start program that raises idle and runs the engine loudly during warm-up.
STAGE1
A safe performance tune that needs no mechanical changes and does not harm the vehicle.
Frequently asked questions
What is IMMO OFF?
Disables the immobilizer system so the vehicle can start and run.
Is there an automatic module for IMMO OFF?
Yes. IMMO OFF is available as a built-in automatic module for 2 ECU types (listed on this page). You choose the options you want in the panel and the module builds the change directly in your own file, so no stored solution is needed for those ECUs.
Which vehicles support IMMO OFF?
We have 177 engineer-made IMMO OFF solutions covering 63 ECU types across 14 brand groups. The lists on this page show the brand groups and ECU types with the most solutions.
How do I order IMMO OFF?
Sign in, upload the original read of your ECU, choose IMMO OFF and download the finished file. Checksum correction is a separate, optional operation (CHECKSUM OK) on supported ECUs. Where we already have a matching solution the file is processed automatically; other jobs are handled by an engineer.
Are the solutions tested?
Yes. Our engineers write every solution with professional tuning tools and test each file on a dyno before it is added to the system.
Ready for IMMO OFF?
Create a free account, upload your ECU file and get it back processed in minutes — AI-assisted, 24/7, every day of the week.
Get Started Now